NETWAY PRODUCT 

The Netway tool can be utilized for a wide variety of multiplex development tasks. The Netway is a user-programmable device, utilizes a network-oriented set of instructions, commands and trigger events to program a desired behavior of the Netway tool. The Netway network program language is designed for convenient programming of the network module behavior. The Netway network emulation capabilities are based on the programmability of the tool and stand-alone operating mode. Once programmed, it is ready to operate autonomously according to the user Emulation program.
Network messages are logged based on the network configuration file, user-defined filters, and user program flow. This dynamic message filtering allows capturing user-defined events and data. The network messages, timers and analog/digital/PWM signals serve as input to the user-defined program engine, which, in response to the input and program flow, produces multiple protocol network messages and signal outputs. The device is capable of handling different networks simultaneously, thereby allowing the gateway functionality.
In addition to the described complex functions, the Netway is also designed for simple tasks such as: monitor and filter network traffic, broadcast network messages out, or generate output signals. Real-time simulation of the network guaranteed to be better than 1ms.

Netway Specifications:

• All protocols are handled simultaneously.
  • Up to ten (10) independent CAN channels per box.
    Standard 11-bit and extended 29-bit header (J1939), optional physical layers for High-Speed Dual-Wire, Single-Wire CAN(GMLAN) and DaimlerChrysler Fault-Tolerance CAN.
    Tool supports Multi-Frame CAN (ISO-15765) and new J2534 standard.
  • Both flavors of J1850: SCP, and GM CLASS2/DaimlerChrysler J1850.
    Up to 3 independent GM Class2 (J1850) channels.
  • UART-based- ISO9141-II (KWP2000), ISO9141-Ford, UBP, AOS, LIN 2.0, ACP, J1708, RS232, SDL, and other protocols.
    Up to ten (10) independent UART channels.
• Modular software/hardware design allows quick custom adaptations.
• PC controlled and stand-alone (autonomous) modes of operation.
• Windows 2000/XP application program for control, setup and data retrieval.
• Library of functions for full custom control, fully compatible with Visual C++, Visual Basic.
  ActiveX, LabView and LabWindows controls are also available as premium options.
• 256 KB of battery-backed static RAM for log buffer and emulation setup.
• 256 KB flash ROM allows quick in-field firmware update.
• Up to 256 MB CompactFlash card options for long-term data logging.
• 8 digital/analog inputs and 2 PWM input signals.
• 8 digital and 4 PWM open drain outputs, 50V and 0.35A.
• PC interface via serial port - 57.6 Kbit/sec.
• PC interface via fast USB port - 12.5 Mbit/sec.
• Real-Time Clock produces date/time stamp on special event messages.
• Power down mode: less than 3 mA current consumption.
• Operates in extended temperature ranges (-40C to +85C).