NETWAY TOOL 
|
|
|
Overview
The Netway is a user-programmable device, utilizes a
network-oriented set of instructions, commands and trigger
events to program a desired behavior of the Netway tool. Once programmed,
it is ready to operate autonomously according to the user
Emulation program.
The device is capable of handling different networks
simultaneously, thereby allowing the gateway functionality.
In addition to the described complex functions, the
Netway is also designed for simple tasks such as:
monitor and filter network traffic, broadcast network
messages out, or generate output signals.
The Netway tool can be utilized for a wide variety of
multiplex development tasks.
Real-time simulation of the network guaranteed to be less
than 1ms.
Specification
The Netway tool is adaptable to all
leading communication protocols including:
|
CAN
|
- Standard 11-bit and extended 29-bit header
(J1939), optional physical layers for High-Speed
Dual-Wire,
Single-Wire CAN (GMLAN) and DaimlerChrysler
Fault-Tolerance CAN.
- Tool supports multi-frame CAN (ISO-15765)
and new J2534 standard.
- Up to ten (10) independent CAN channels.
|
|
J1850
|
- Ford SCP (standard or enhanced), GM Class2,
and DaimlerChrysler J1850.
- Up to 3 independent GM Class2 (J1850) channels.
|
|
UART
|
- ISO9141-II (KWP2000), ISO9141-Ford, UBP, AOS,
LIN 2.0, ACP, J1708, RS232, SDL, and other
protocols.
- Up to ten (10) independent UART channels.
|
|
Other
|
- IIC, SPI and other customer specific protocols.
|
|
|
PRODUCTS
